TROUBLE SHOOTING INKJET PRINTER

We will share to you to resolve general problems that happens on inkjet printer.

EPSON PRINTER

HP PRINTER

CANON PRINTER

 

Epson R210 and R230 failed loading paper

SOLUTION :
This problems could happen because pick up roll rubber was slip or thin.
Try to clean with dura klin :

  1. Drop dura klin in pick up roll to clean particle/ residue ink.
  2. Drop dura klin in blank paper, and print out several times
  3. Seal pick up roll with cellophane tape so that rubber becomes thicker.

Epson C series (C41, C43, C45) has streak out result

SOLUTION :
Inject dura klin in capping unit (sponge disposal ink) 2-4 ml until it clean.

Epson Printer Maintenance Error / Led Indicator Blinking

SOLUSI :
Waste ink pad counter was full, reset the counter with resetter tools like ssclg/ adjustment program.

Resetting Refill catridge ( full ink indicator ) [ HP 21, 22, 27, 28, 56, 57, 58 ]

SOLUTION :
There are 2 ways solution.

First :

 

 

1. Prepare 2 papers on printer, take off catridge, and put sticker / cellophane tape on contact #1, put back catridge on printer and let it printing alignment page.

 

 

 

 

2. Take off Catridge and put sticker / cellophane tape on cantact #2, put back catridge on printer and let it printing alignment page once more.

3. Take off Catridge and take off both stickers / cellophane tape, put back catridge on printer. After this process, ink indicator should be normal

 

Second :

If the first solution was failed, than do the second way.
The second way is almost the same as first way, the difference is the contact number.

 

1. Prepare 3 papers on printer, take off catridge, and put sticker / cellophane tape on contact #1, put back catridge on printer and let it printing alignment page.

2. Take off Catridge and put sticker / cellophane tape on cantact #2, , put back catridge on printer and let it printing alignment page again

 

 


3. Take off Catridge and put sticker / cellophane tape on cantact #3, , put back catridge on printer and let it printing alignment page again

4. Take off Catridge and take off all stickers / cellophane tape , put back catridge on printer. After this process, ink indicator should be normal

 

HP Deskjet 3600 and 3700 series , printhead move on the right quickly and loudly / print out was jammed.

SOLUTION :
This happen because bar encoder strip was dirty.
Clean it with clean cloth which have been dripped dura klin.

Canon IP 1200, 1300, 1600, 1700, 2200 blinking after refilled

SOLUTION :
Push and hold "Resume" button for 10 seconds, and then click "ok" on warning window on your monitor.

Canon IP 1000, IP 1500, I 255, I 320 and Pixma Series failed loading paper


SOLUTION:
This happen because there is a " thing" on the paper guide roll/ pick up roll unit, clean or remove that "thing", then try again.

Canon Printer Maintenance Error / led indicator Blinking

SOLUTION :
Waste ink pad counter was full, reset the counter with resetter software tools / adjustment program.

 


   Manual Service Book
dealer welcome
100% technician recommended
news/events



ENGLISH


INDONESIAN