How to clean clogged printhead ?

It's easy to clean clogged printhead,
it doesn't need to disassembly the printer, and it doesn't required tools like screw, plier, or someting else.
With Dura Klin, this work hardly easy.

This is will show you how to use it step by step for each brand



Clean Clogged printhead on
EPSON Printer

A
Prepare syringe, containing 5ml Dura Klin, put the rubber tube on it and prepare a folded tissue.

B
Sliding head unit to middle of printer with manual or software, take off the catridge and cable power.

C
Sliding head unit to side printer , put folded tissue in front of rolling paper.

D
stick rubber tube to the nozzle pole of head printer , then draws sryinge of 10ml, then pumping slowly until run out fluid.

E
If freeze ink at nozzle has come out at tissue, then cleaning process has succeeded

F
Put back catridge which have been loaded ink , Does head cleaning and print Nozzle check pattern in software / manual

 

Clean Clogged printhead on
CANON Printer

A
Prepare syringe, containing 5ml Dura Klin, and prepare a folded tissue,
Soaking catridge into plastic bowl has contained +/- 4ml dura klin for +/- 15 minutes

B-1
Put the rubber tube on the syringe, then pump slowly through the air hole, which is located on the top of the head until the ink comes out from the base of the head.

B-2
Put the rubber tube on the syringe, then pump slowly on the filter nozzle head, until the bubbles come out from the base of the head.

C-1
Test how much ink comes out by touching the base of the head with a tissue. When the result is even, the head is ready to use.

C-2
Pump air hole , which is located on the top of head until ink comes out from the base of the head.

D-1
If the ink does not come out evenly or does not come out at all, inject Dura Klin to each sponge refill (about 4ml), then soak the head until the result improves.
D-2
Test how much ink comes out by touching the base of the head with a tissue. When the result is even, the head is ready to use.

 

Clean Clogged printhead on
HP or LEXMARK Printer

A
Soaking catridge into plastic bowl has contained +/- 4ml dura klin for +/- 15 minutes

 

B
Prepare syringe (empty air), put the rubber tube on it , then pump slowly through the air hole, which is located on the top of the head until the ink comes out from the base of the head.

C
Test how much ink comes out by touching the base of the head with a tissue. When the result is even, the head is ready to use.

D
If the ink does not come out evenly or does not come out at all, inject Dura Klin to each sponge refill (about 4ml), then soak the head until the result improves.

 

Clean Clogged printhead on
Brother Printer

Cleaning clogged ink on Brother printer MFC series :

1. Plug out the clogged Catridge .
2. inject Dura Klin to catridge +/- 2ml
3. Plug in the catridge back to the printer.
4. on main menu, enter the cleaning procedure :

  • On main menu , Press *2864
  • 76, Cleaning All
  • The choices of Colour is on the Navigation button
    1. Single Purge
    2. Normal Purge
    3. Power Purge
    4. Init Purge
  • Start

 


   Manual Service Book
dealer welcome
100% technician recommended
news/events



ENGLISH


INDONESIAN